Le consegne potrebbero subire dei ritardi. Grazie per la vostra comprensione
Acrylic sealant, designed for filling cracks and gaps in wooden floors and baseboards.
CARVER SEAL is plastoelastic, odourless. Can be sanded and over-coated with floor finishes.
It is available in several colours: oak light, teak/iroko light, ipé/iroko dark, doussié and white.
The surfaces to be treated should be clean and dry.
Cut the tip of the threaded end, then screw on the nozzle. Apply the sealant by means of a cartridge gun and smooth it with an even spatula. Not to stain the edges, it is recommended to protect them with masking tape, that should be removed immediately after application.
- Fresh sealant residues are easily eliminated with Carver NET PARQUET stain-remover, whereas once hardened, the product can be removed only mechanically.
- During hardening, work area must be ventilated.
- Fresh product may cause irritation to skin. In case of contact, wash the interested area with soap and water.
Dispose of excess product and empty containers properly.
If the original unopened container is stored in a cool and dry place, the product will keep for at least 24 months.