APPLICATION
Sand the floor with coarse and medium grained abrasive.
Mix STUCCO AQ with dust from the final sanding to form an homogeneous paste. Spread it quickly with a stainless, wide spatula (American spatula), pushing as much filler as possible into the cracks.
After drying, which normally requires 2-3 hours, sand or screen with fine abrasive, then vacuum and tack (with an antistatic cloth) thoroughly.
Should the filler shrink excessively in the largest cracks (over 2 mm), do the filling once again as described above.
Go on with the finishing or the impregnation.
NOTICE
- Before application, allow the wood manufacture and the product to reach a temperature between +15°C and +35°C.
- The support to be treated should have a moisture content inferior to 12%.
Dispose of excess product and empty containers properly!
If the original unopened container is stored in a cool and dry place, the product will keep for at least 12 months.
